What are the aspects of the non-standard characters in the non-standard motor mold base?

Article:Jicheng Intelligent|Date:2020-12-19|Views:1116

Standard motor mold bases are common, and their standardization is relatively high. However the Non-standard motor mold bases are customized, which are specially customized motor mold bases for different mold production. The "non-standard" in the name of the non-standard motor mold base means non-standard, and this non-standard is manifested in many aspects of the motor mold base.

The non-standard motor mold base is finished on the basis of the standardized motor mold base. The finishing mentioned here refers to the cavity, precise positioning, locking module, heating/cooling fluid channel, thimble hole, etc. required for a set of molds other than the 4 guide pin holes. Thus, mold blank manufacturers can directly install their processed mold cores (mold cores), and then they can perform mold trial and plastic product production.

What are the aspects of the non-standard characters in the non-standard motor mold base?

The reason why everyone chooses non-standard motor mold bases is because other standard types of motor mold bases cannot meet your corresponding application requirements in terms of overall structure. Secondly, because some standard types of motor mold bases cannot meet the needs of optimized mold applications in terms of specific dimensions. In this way, it can be shown that the non-standard motor formwork that can meet everyone's application needs should be non-standard in terms of specific size and overall structure. So in general, the meaning of non-standard in the non-standard motor formwork is usually manifested in these aspects.

The die assembly of the non-standard motor die set must ensure that the convex and concave dies are aligned to make the gap uniform. For this reason, attention should be paid to the assembly sequence of the upper and lower molds. In the assembly sequence of the upper and lower molds of the non-standard mold base, we firstly install the one that is restricted maximally in the main parts of the upper and lower molds, and then use it to adjust the position of the other one.

Website:http://www.czjicheng.com/shown-24.html

Share..